This Week's Most Popular Stories About Ghost Immobiliser Car

This Week's Most Popular Stories About Ghost Immobiliser Car

Ghost Immobiliser Cars

Ghost immobilisers are high-tech security gadget that protects you from key cloning or hacking. It is completely undetectable, and it leaves no marks after installation. This makes it a very popular choice for owners of expensive cars or cars that are rare.

The buttons on your steering wheel, console and door panels are used to generate a unique pin-code sequence (up to twenty characters) that is required to begin the engine.

There are no key-fobs, LEDs or other indicators to indicate its location

A ghost immobiliser is a new piece of technology that guards your car from key cloning, hacking, and theft. It's a discrete electronic device that connects to your vehicle's data network and detects signals from the engine control unit (ECU). This device prevents your engine from starting until a specific PIN code is entered, which ensures that thieves cannot drive away with your pride and joy.


The device is connected to the CAN Bus in your vehicle, allowing it to intercept data from the ECU of the car and the other connected components. Installation is a highly specialised procedure that requires a skilled installation and should only be completed by a licensed installer. Once installed, it will be hidden inside your vehicle and therefore unrecognisable to thieves. It can detect vibrations, and also the movement of vehicle components and components.

If a burglar attempts to disable the device and disable it, it will cause the car's engine management lights to flash rapidly and the horn to honk. This alerts the driver that there is a problem with the engine. They might panic and then abandon their vehicle. This is a fantastic alternative to an immobiliser that is standard in that the owner of the vehicle will be able to call the authorities right away should the vehicle be in danger.

The device can be disabled via an application that can be accessed both by the owner and the installer (even even though the majority of people will never forget their PIN code). Some systems even come with an option for service/valet, which will temporarily disarm the immobiliser, allowing someone who is trusted to drive your vehicle without needing the PIN. The system will then be activated when the vehicle reaches 31 mph and has been driven for a specified period of time.

There is no Bluetooth or wireless connectivity

This means it can't be recognized by modern thieves using diagnostics to identify the circuit's cut or hidden immobiliser and is inaccessible because it does not utilize radio signals. This makes it a potent deterrent against vehicle theft. The GHOST also has options for specific vehicle features such as gearbox lock (to prevent the engine starting when in the gearbox) and anti-hijack, which we can set up for you upon installation.

Our certified installers can install the GHOST to a variety of vehicles. It is fully compatible with all Mercedes vehicles. Contrary to other products on market The GHOST works with your vehicle's existing interfaces such as buttons on your steering wheel or driver's side door card or centre console. This makes it an advanced stealth immobiliser that operates independently of your factory-installed alarm or tracker, and does not show any sign of its existence when installed in your car and hence the name.

Contrary to some immobilisers which only have a PIN code to disable the device The Ghost can be disabled by entering in a secret sequence of button presses from the driver's mobile app. This is possible from anywhere in the world, and is easy & hassle free. You can modify it as many times as desired but only the app's owner will be able to see the changes.

You can also disable the GHOST in your satnav by entering in a different sequence. This makes it more secure and less attractive to thieves. This method is so effective, that a Bentley Bentayga valued at PS200k was stolen just recently as it was parked, and the driver entered their PIN in order to disable the device.

No annual fees

Traditional immobilisers stop vehicles from starting without the correct key fob, Ghost goes a step further and thwarts a variety of techniques used by thieves to steal vehicles. Ghost can detect signal jamming, device spoofing, and other methods to make it harder to steal your vehicle. The device also requires an additional, unique pin number or code sequence to start the engine. This deters thieves and encourages thieves to leave your car at home.

This makes it an ideal tool for high-end cars that are more at risk of theft. As a result, you will have a better security and increase the value of your vehicle for resale. Installing the Ghost Immobiliser may even lower your insurance rates. The Ghost Immobiliser is more expensive than standard immobilisers, but the peace assurance it offers is worth the cost.

Unlike other devices, Ghost doesn't require an annual subscription. It connects to your phone via low energy bluetooth. This creates a secure connection between the immobiliser and your phone, which makes it almost impossible for criminals or hackers to intercept. There are also no LED indicators to reveal the whereabouts of the device.

The Autowatch Ghost is a reliable car immobiliser that is easy to install and remove from your car.  cost of ghost immobiliser  allows you to disable the immobiliser when you take your vehicle for service or tested. When you return, simply enter the PIN code to allow your vehicle to start up again.

The Autowatch Ghost can also be used with newer vehicles which do not have an immobiliser fitted at the factory. This means that it can be transferred between vehicles when you sell your previous one, as long as the new vehicle is compatible.

No need to memorize PIN codes

A ghost immobiliser car is an extra layer of security that prevents tech-savvy thieves from starting your vehicle even in the event that they've copied your key fob or taken it. It connects to your car's control area network (CAN) system and shuts down the engine if you press the start button without entering a PIN code sequence first. It doesn't require a new keypad, instead, it uses buttons on your vehicle such as the steering wheels and door panels as well as the central console. This means that it's not just inaccessible to thieves, but also preserves the look of your car's interior.

The Autowatch Ghost 2 immobiliser is an electronic device discrete that connects to your vehicle's ECU to create an impossible barrier for thieves to breach. It operates silently and doesn't emit radio signals, which makes it completely invisible to traditional RFID scanning technology that is that thieves use to steal the signal from your key fob and clone it. It is a TASSA-verified product, which means it has been independently test to the highest standards. Certain insurance companies recognize this as a valuable addition to protect your vehicle's security.

You can switch the ghost CAN immobiliser into "Service/Valet Mode" if you need to give your vehicle to service, valet park or a friend drive it for you. You can switch this mode by entering the unique pin code that is only available to you. This can be changed at any time.

This is a simple and easy process that you can accomplish with the help of the guide included with the Ghost. It will explain how to enter the code and how to reset it if you forget.

Simple to reset

Since their introduction, ghost immobilisers have been the top choice in the field of vehicle security. Utilizing  car immobiliser ghost  and communication using CANBus to ECU tech and unique pin code entry, it's been able to keep one step ahead of the most determined thieves. In contrast to other immobiliser systems, it doesn't need keys or other wireless connections to function. It can also be removed from your vehicle if you decide to sell it.

It's common to forget your PIN number, the same way you would forget any other password or security measure. If this happens, don't be concerned as it's easy to reset. All you need to do is call the person who installed your device and they'll provide you with an emergency code. This code is usually hidden in the scratch-off section of a card provided during installation. It's essential to store the code in a safe place.

The Emergency Code will allow you to regain access to your vehicle so that you can drive it normally and is a great solution in situations where you need to give your car to valet parking or for service, for example. It is also a good option if you want to ensure that your vehicle is secure while you're away from it, so that nobody other person can start the engine.

If you are looking to increase the security of your vehicle and safeguard your pride and joy from hacking, cloning, and remote theft, then think about installing a ghost immobiliser by Autowatch a market leader in the UK's market. For more information contact us today.